购物车
  • 全部删除
  • TargetMol
    您的购物车当前为空

Benzocaine

Benzocaine
Benzocaine 作用电压门控 Na+通道的共同受体,+30 mV 下的 IC50为0.8 mM。
产品编号 T0924Cas号 94-09-7
选择批次:
纯度:99.97%
联系我们获取更多批次信息

Benzocaine

产品编号 T0924别名 苯唑卡因, 苯佐卡因Cas号 94-09-7
Benzocaine 作用电压门控 Na+通道的共同受体,+30 mV 下的 IC50为0.8 mM。
TargetMol的所有产品仅用作科学研究或药证申报,不能被用于人体,我们不向个人提供产品和服务。请您遵守承诺用途,不得违反法律法规规定用于任何其他用途。
规格价格库存数量
100 mg¥ 115现货
500 mg¥ 247现货
1 g¥ 358现货
1 mL x 10 mM (in DMSO)¥ 280现货
大包装 & 定制
加入购物车

"Benzocaine"的相关化合物库

产品介绍

生物活性
产品描述
Benzocaine is a surface anesthetic that acts by preventing transmission of impulses along nerve fibers and at nerve endings.
靶点活性
Na+ channel:0.8 mM (IC50)
体外活性
Benzocaine blocks μ1 wild-type Na+ currents in a dose-dependent manner with IC50 of 0.8 mM in HEK293T cells. Benzocaine (1 mM) blocks about 55% of wild-type Na+ current but about 95% of μ1-N1584A mutant current. Benzocaine (1 mM) blocks about 55% of wild-type μ1 currents, but about 80% of μ1-I1575A mutant current. [1] Benzocaine results in a biphasic (protective/inductive) concentration-dependent hemolytic effect upon rat erythrocytes, with an effective Benzocaine:lipid molar ratio in the membrane for protection (RePROT), onset of hemolysis (ReSAT) and 100% membrane solubilization (ReSOL) of 1.0:1, 1.1:1 and 1.3:1, respectively. [2] Benzocaine and 4-hydroxybenzoate interact with the open and inactivated channels during repetitive pulses, but during the interpulse the complex dissociates too fast to accumulate sufficient use-dependent block of Na+ currents. [3] Benzocaine (500 μM) reduces the peak and steady-state currents and increases the amplitude of the inactivating component from 21.7% to 30.2% (n=7, P<0.05), so that benzocaine-induced block at the end of pulses to +60 mV averaged 30.9% (n=7). Benzocaine (500 μM) significantly accelerates the initial phase of deactivation (τf=27.2±2.6 ms, n=7, P<0.01), but does not modify the slow phase of tail current decline. Benzocaine binds with high affinity to an intracellular binding site to produce 'agonist' effects and to a low affinity subsite, which is also located in the inner mouth, to produce the blocking effects. Benzocaine and extracellular K(+) interact to modify the voltage-dependence of channel opening. [4]
体内活性
Benzocaine is absorbed rapidly and similarly through both viable and nonviable skin of the hairless guinea pig, the absorption of the two acidic compounds, benzoic acid and PABA, is greater through nonviable skin. [5]
别名苯唑卡因, 苯佐卡因
化学信息
分子量165.19
分子式C9H11NO2
CAS No.94-09-7
储存&溶解度
存储Powder: -20°C for 3 years | In solvent: -80°C for 1 year | Shipping with blue ice.
溶解度信息
DMSO: 50 mg/mL (302.68 mM)
Ethanol: 31 mg/mL (187.7 mM)
溶液配制表
Ethanol/DMSO
1mg5mg10mg50mg
1 mM6.0536 mL30.2682 mL60.5364 mL302.6818 mL
5 mM1.2107 mL6.0536 mL12.1073 mL60.5364 mL
10 mM0.6054 mL3.0268 mL6.0536 mL30.2682 mL
20 mM0.3027 mL1.5134 mL3.0268 mL15.1341 mL
50 mM0.1211 mL0.6054 mL1.2107 mL6.0536 mL
100 mM0.0605 mL0.3027 mL0.6054 mL3.0268 mL

计算器

  • 摩尔浓度 计算器
  • 稀释 计算器
  • 配液 计算器
  • 分子量 计算器

体内实验配液计算器

请在以下方框中输入您的动物实验信息后点击计算,可以得到母液配置方法和体内配方的制备方法:
TargetMol | Animal experiments比如您的给药剂量是 10 mg/kg ,每只动物体重 20 g ,给药体积 100 μLTargetMol | Animal experiments 一共给药动物 10 只 ,您使用的配方为 5% TargetMol | reagent DMSO+ 30%PEG300+ 5%Tween 80 + 60% ddH2O. 那么您的工作液浓度为 2 mg/mL
母液配置方法: 2 mg 药物溶于 50 μLDMSOTargetMol | reagent ( 母液浓度为 40 mg/mL ), 如您需要配置的浓度超过该产品的溶解度,请先与我们联系。
体内配方的制备方法:50μLDMSOTargetMol | reagent 母液,添加 300 μLPEG300TargetMol | reagent 混匀澄清,再加 50μLTween 80, 混匀澄清,再加 600μLddH2OTargetMol | reagent 混匀澄清

以上为“体内实验配液计算器”的使用方法举例,并不是具体某个化合物的推荐配制方式,请根据您的实验动物和给药方式选择适当的溶解方案。

1 请输入动物实验的基本信息
mg/kg
g
μL
2 请输入动物体内配方组成,不同的产品配方组成不同,如有配方需求,可先联系我们提供正确的体内配方。
% DMSO
%
%Tween 80
%ddH2O

剂量转换

对于不同动物的给药剂量换算,您也可以参考 更多

关键词

Related Tags: buy Benzocaine | purchase Benzocaine | Benzocaine cost | order Benzocaine | Benzocaine chemical structure | Benzocaine in vivo | Benzocaine in vitro | Benzocaine formula | Benzocaine molecular weight